What does the Incure LGT-60-5 do?

The Incure LGT-60-5 mounts onto the tip of any Ø5mm UV lightguide and redirects its UV output at a 60° oblique angle relative to the lightguide axis. This allows curing of bond faces in recessed cavities, angled slots, and constrained assembly fixtures where the approach path is too narrow or mechanically obstructed for a 90° right-angle terminator.

When should I use the LGT-60-5 vs the LGT-90-5?

Use the Incure LGT-90-5 when the bond face is exactly perpendicular to the lightguide approach axis and a full right-angle exit is feasible. Use the Incure LGT-60-5 when a full 90° approach is mechanically blocked — a recessed cavity, angled slot, or enclosure geometry where the 90° body cannot enter. The 60° exit angle provides clearance the 90° cannot.

Which lightguides is the LGT-60-5 compatible with?

The Incure LGT-60-5 is compatible with any UV spot curing lightguide with a Ø5mm exit port, including the Incure LLG-1P-5 liquid light guide and compatible third-party liquid light guide systems with a matching Ø5mm aperture. Verify your lightguide exit port diameter before ordering.

Does the LGT-60-5 reduce UV intensity?

The Incure LGT-60-5 aperture matches the Ø5mm lightguide core diameter — there is no aperture step-down at the connection interface. The aluminum body is rated for continuous UV exposure. Any intensity reduction is a function of the lightguide and UV source, not the terminator itself.

When should I use the LGT-60-5 vs the LGT-60-8?

Use the Incure LGT-60-5 when your lightguide has a Ø5mm exit port and the bond face requires a precision spot at 60°. Use the Incure LGT-60-8 when your lightguide has a Ø8mm exit port and the wider spot is needed to cover a larger angled bond face in one pass.

60° Lightguide Terminator — Incure LGT-60-5

Name: Incure LGT-60-5 60° Lightguide Terminator
Brand: Incure

Incure LGT-60-5 mounts onto the tip of any Ø5mm UV spot curing lightguide and redirects its output at a 60° oblique angle — reaching recessed bondlines, angled cavities, and constrained fixtures where a straight lightguide and a right-angle LGT-90-5 cannot both physically enter.

Reaches Oblique Bond Faces the LGT-90-5 Cannot Access

A 90° terminator requires a clear approach path parallel to the bond face — and the body itself needs clearance in the perpendicular direction. Where the fixture housing or enclosure geometry blocks that 90° approach, the LGT-60-5's 60° oblique exit fits through narrower approach envelopes and still delivers UV to bond faces angled off the lightguide axis. It reaches where the right-angle cannot.

Cures Constrained Fixtures Without Disassembling the Part

Attach the LGT-60-5 once; the 60° exit now aligns the cure window with recessed or angled bond faces that the fixture previously made inaccessible to straight-line UV delivery. Eliminates the handling step of removing the part from its fixture, exposing the joint, and re-fixturing — reducing cycle time and part-to-part repositioning variation.

Ø5mm Aperture — Precision Spot at 60° Oblique Access

The LGT-60-5 aperture matches the Ø5mm lightguide core with no step-down — the full Ø5mm output exits at 60°. Aluminum body is rated for continuous high-intensity UV exposure. For wider oblique Ø8mm access at 60°, see LGT-60-8. For perpendicular Ø5mm access at 90°, see LGT-90-5.

Incure LGT-60-5 60-degree lightguide terminator Ø5mm aperture aluminum body

Product Specification — LGT-60-5 60° Lightguide Terminator
Model	LGT-60-5
Exit Angle	60°
Aperture Diameter	Ø5mm
Compatible Lightguide Core Diameter	Ø5mm
Body Material	Aluminum
Compatible Incure Models	LLG-1P-5
Compatible UV Sources	UV spot curing systems with Ø5mm lightguide output
Best For	Oblique bond faces · Recessed cavities · Constrained fixture geometries
Typical Applications
Electronics Assembly	Recessed PCB bond joints · Slot-constrained housing bonds · Angled connector interfaces
Medical Device Manufacturing	Angled catheter tip access · Recessed needle hub fixtures · Constrained jig assemblies
Optical Assembly	Recessed prism bonding · Angled lens-edge joints in enclosed fixtures
Industrial / Automotive	Angled sensor housing seals · Recessed gasket faces · Slot-constrained bond lines
Ordering
P/N	LGT-60-5

The Incure LGT-60-5 is compatible with any UV spot curing lightguide with a Ø5mm exit port. Verify your lightguide exit port diameter before ordering; aperture mismatch will cause UV energy loss at the connection interface. For Ø8mm lightguide systems at 60°, see LGT-60-8. For perpendicular Ø5mm access, see LGT-90-5.