Incure Sniper™ SN-19 is the second-widest bore in the range — 0.859 mm ID for low-viscosity UV adhesives, cyanoacrylates, and aqueous coatings where the SN-18's 1.039 mm deposit is wider than the bond pad requires. The SN-19 maintains the same low-pressure flow characteristic as the S18 while narrowing the bead diameter for more precise placement on compact joints and tight bond pad geometries. Non-magnetic phosphor bronze construction eliminates ferrous contamination on sensitive assemblies; the orange PP Luer Lock hub fits any standard dispensing barrel without adapters.
At 0.859 mm ID, the SN-19 is 17% narrower than the SN-18 (1.039 mm), depositing a tighter bead width while still flowing low-viscosity UV adhesives, cyanoacrylates, and aqueous coatings freely at low pump pressure. When the SN-18's wider deposit over-fills a compact bond pad or spreads into adjacent components, the SN-19 brings the adhesive footprint back inside the joint geometry — without switching to a finer gauge that would restrict flow on thin materials.
Steel dispensing needles shed ferrous particles that contaminate magnetic sensors, HDD read/write assemblies, and precision optical alignment components. The SN-19 is machined from phosphor bronze — non-magnetic, non-ferrous, and chemically inert to UV adhesives, cyanoacrylates, and the solvents used in electronics and medical device manufacturing. No magnetic particle sweep is required between dispensing operations.
The orange polypropylene Luer Lock hub seats directly on any standard 1cc to 30cc dispensing barrel — no adapters, no proprietary connectors, no tools required. Orange is the industry-standard colour code for this bore size; it allows immediate gauge identification during line changeovers when multiple Sniper™ gauges are in use, without reading a label or measuring the tip.
| Needle Specifications — Incure Sniper™ SN-19 | |
| Model | SN-19 |
| Gauge | 19 |
| Inner Diameter | 0.859 mm |
| Outer Diameter | 1.059 mm |
| Hub Colour | Orange |
| Hub Type | PP Luer Lock |
| Cannula Material | Phosphor Bronze |
| Available Coatings | No Coating (NC) Electroless Nickel (EN) Nickel PTFE (NPTFE) Nickel Polymer Type SLK (NP) Parylene Type C (PY) |
| Pack Size | 10 pcs/pack |
| Nominal Overall Length | 0.709 in | 18 mm |
| Approximate Weight | 0.016 oz | 0.454 g |
| Compatibility & Application | |
| Dispensing Equipment | Standard 1cc–30cc Luer Lock dispensing barrels — no adapters required |
| Recommended Materials | Low-viscosity UV adhesives (<1,000 cP) · Cyanoacrylates · Aqueous sealants · Thin conformal coatings · Flux |
| Industries | Electronics assembly · Medical device manufacturing · Optical bonding · Semiconductor packaging |
| Bore Position in Range | Second-largest (0.859 mm) — next widest after SN-18 (1.039 mm) in the Sniper™ range |
| Ordering | |
| P/N Format | SN-19-[Coating] |
| Coating Code | NC / EN / NPTFE / NP / PY |
| Example P/N | SN-19-NC |
The SN-19 is the second-widest bore in the Incure Sniper™ range. For maximum flow at the lowest pump pressure, see SN-18 (1.039 mm ID). For controlled dispensing of medium-viscosity materials (1,000–10,000 cP), see SN-20 (0.681 mm ID) or SN-21 (0.610 mm ID). For high-viscosity gels and filled formulations, see SN-23 (0.564 mm ID), SN-25 (0.437 mm ID), SN-27 (0.335 mm ID), or SN-30 (0.234 mm ID). All Sniper™ needles are phosphor bronze with PP Luer Lock hub and are available in No Coating, Electroless Nickel, or Nickel PTFE — same three options across the full range.