What does the Incure Perimeter™ PRM-FRONT do?

The PRM-FRONT is a tinted acrylic shield that wraps around the front of an F-Series™ flood lamp and its stand assembly, containing forward-scattered UV so it does not reach the operator or nearby personnel. The tinted acrylic body remains translucent enough for the operator to monitor the cure in progress.

Which F-Series™ models is the PRM-FRONT compatible with?

The PRM-FRONT mounts to the shared F-Series™ stand rather than the individual lamp head, so one shield fits F100, F200, F200P, F400, and F500. It is not compatible with the F900P, which uses a different, larger stand.

Do I also need the PRM-REAR shield?

The PRM-FRONT alone covers the direction the operator faces. Add the supplemental PRM-REAR when complete 360° shielding is desirable — for example, when personnel or equipment are positioned behind the lamp station on a shared production floor.

Do I need tools to install the PRM-FRONT?

No. The PRM-FRONT lifts on and off the F-Series™ stand by an integrated carry handle — no fasteners or tools required.

Does the PRM-FRONT block my view of the cure?

No. The shield is tinted acrylic rather than opaque material, so the operator can monitor the part and the cure cycle while the shield blocks scatter UV from reaching them.

Front UV Shield — Incure Perimeter™ PRM-FRONT

Name: Incure Perimeter™ PRM-FRONT Front UV Shield
Brand: Incure

Incure Perimeter™ PRM-FRONT is the primary UV containment shield for F-Series™ flood lamps — where the supplemental PRM-REAR only blocks backside radiation, the PRM-FRONT wraps around the lamp and stand assembly to contain the scatter UV headed directly at the operator, while its tinted acrylic body keeps the cure visible throughout the cycle.

The Primary Shield — Blocks UV Headed Directly at the Operator

The PRM-FRONT wraps around the lamp and stand assembly to contain forward-scattered UV — the direction the operator faces. It mounts to the shared F-Series™ stand rather than the individual lamp head, so one shield size fits F100, F200, F200P, F400, and F500. The F900P uses a different, larger stand and is not compatible.

See the Cure Without the Exposure

Tinted acrylic construction, not opaque metal or plastic, lets the operator monitor the part and the cure cycle in progress while the shield blocks forward-scattered UV from reaching them. There is no need to lift or remove the shield to check on the cure.

Installs and Removes in Seconds — No Tools

An integrated carry handle lets the shield lift on and off the F-Series™ stand without fasteners or tools — fast enough to move between stations, swap lamp configurations, or set aside for maintenance access without workflow disruption.

Incure Perimeter™ PRM-FRONT tinted acrylic front UV shield with carry handle

Product Specification — PRM-FRONT Front UV Shield
Model	PRM-FRONT
Material	Tinted Acrylic
Mounting	Wraps around F-Series™ lamp & stand assembly; integrated carry handle
Weight	6 lbs
Dimensions (W × D × H)	12 × 11.5 × 11 in
Installation	No tools — lifts on/off by handle
Compatible F-Series™ Models	F100 · F200 · F200P · F400 · F500
Compatible Accessory	Incure Perimeter™ PRM-REAR (optional, for full enclosure)
Best For	Primary front-of-lamp operator shielding
Typical Applications
Shared Production Floors	Blocks stray UV from reaching adjacent operators and equipment
Multi-Operator Assembly Cells	Lets an F-Series™ station run beside other manual work
R&D and QC Benches	Contains scatter UV on a shared lab bench
Ordering
P/N	PRM-FRONT

The Incure Perimeter™ PRM-FRONT is compatible with all stand-mounted F-Series™ models — F100, F200, F200P, F400, and F500. It is not compatible with the F900P, which uses a different, larger stand. For full 360° enclosure, pair with the supplemental PRM-REAR.