What does the Incure LGT-60-8 do?

The Incure LGT-60-8 mounts onto the tip of any Ø8mm UV lightguide and redirects its UV output at a 60° oblique angle relative to the lightguide axis. This allows curing of wider bond faces in recessed cavities, angled slots, and constrained assembly fixtures where a 90° right-angle terminator cannot enter and the Ø5mm LGT-60-5 cannot cover the full bond area in one pass.

When should I use the LGT-60-8 vs the LGT-60-5?

Use the Incure LGT-60-5 when your lightguide has a Ø5mm exit port and a precision spot at 60° is sufficient. Use the Incure LGT-60-8 when your lightguide has a Ø8mm exit port and the wider Ø8mm spot is needed to cover a larger angled bond face in one pass — eliminating the repositioning step required when a Ø5mm spot is undersized for the joint.

Which lightguides is the LGT-60-8 compatible with?

The Incure LGT-60-8 is compatible with any UV spot curing lightguide with a Ø8mm exit port, including the Incure LLG-1P-8 liquid light guide and compatible third-party liquid light guide systems with a matching Ø8mm aperture. Verify your lightguide exit port diameter before ordering.

Does the LGT-60-8 reduce UV intensity?

The Incure LGT-60-8 aperture matches the Ø8mm lightguide core diameter — there is no aperture step-down at the connection interface. The aluminum body is rated for continuous UV exposure. Any intensity reduction is a function of the lightguide and UV source, not the terminator itself.

When should I use the LGT-60-8 vs the LGT-90-8?

Use the Incure LGT-90-8 when the bond face is exactly perpendicular to the lightguide approach axis and a full right-angle exit is feasible. Use the Incure LGT-60-8 when a full 90° approach is mechanically blocked — a recessed cavity, angled slot, or enclosure geometry where the 90° body cannot enter. The 60° exit angle provides clearance the 90° cannot.

60° Lightguide Terminator — Incure LGT-60-8

Name: Incure LGT-60-8 60° Lightguide Terminator
Brand: Incure

Incure LGT-60-8 mounts onto the tip of any Ø8mm UV spot curing lightguide and redirects its output at a 60° oblique angle — curing wider angled bond faces, large recessed bondlines, and constrained fixtures where a straight lightguide cannot physically enter and the narrower LGT-60-5 cannot cover the full bond face in one pass.

Covers Wider Angled Bond Faces Than the LGT-60-5 in One Pass

The LGT-60-5's Ø5mm spot requires repositioning when the angled bond joint is wider than the cure window — adding cycle time and cure-to-cure variation. The LGT-60-8's Ø8mm aperture delivers a proportionally wider cure spot at the same 60° oblique exit, covering more of the bond face per trigger cycle. For Ø8mm lightguide systems, it eliminates the repositioning step the Ø5mm terminator requires on wide angled joints.

No Aperture Adapter on the Ø8mm Lightguide Port

The LGT-60-8 aperture is sized to match the Ø8mm lightguide core directly — no step-down adapter, no coupling loss at the interface. Mounts directly onto any Ø8mm lightguide exit port, including the Incure LLG-1P-8. Adapter-free coupling means no UV energy is lost before the beam reaches the 60° redirecting element.

Ø8mm Aperture — Wider Spot for Larger Angled Bond Areas

The LGT-60-8 exits at 60° with a full Ø8mm aperture — the same oblique angle as the LGT-60-5, but with the wider exit geometry of the LGT-90-8. Aluminum body is rated for continuous high-intensity UV exposure. For precision Ø5mm access at 60°, see LGT-60-5. For perpendicular Ø8mm access at 90°, see LGT-90-8.

Incure LGT-60-8 60-degree lightguide terminator Ø8mm aperture aluminum body

Product Specification — LGT-60-8 60° Lightguide Terminator
Model	LGT-60-8
Exit Angle	60°
Aperture Diameter	Ø8mm
Compatible Lightguide Core Diameter	Ø8mm
Body Material	Aluminum
Compatible Incure Models	LLG-1P-8
Compatible UV Sources	UV spot curing systems with Ø8mm lightguide output
Best For	Oblique bond faces · Wide-spot delivery · Constrained fixture geometries
Typical Applications
Electronics Assembly	Wide PCB bond joints at oblique angles · Large slot-constrained housing bonds · Angled connector flanges
Medical Device Manufacturing	Wide angled catheter tip access · Large recessed needle hub fixtures · Oblique gasket sealing
Optical Assembly	Wide prism bonding at oblique approach · Angled lens-edge joints with large bond footprint
Industrial / Automotive	Wide angled sensor housing seals · Large recessed gasket faces · Wide slot-constrained bond lines
Ordering
P/N	LGT-60-8

The Incure LGT-60-8 is compatible with any UV spot curing lightguide with a Ø8mm exit port. Verify your lightguide exit port diameter before ordering; aperture mismatch will cause UV energy loss at the connection interface. For precision Ø5mm lightguide systems at 60°, see LGT-60-5. For perpendicular Ø8mm access, see LGT-90-8.