What UV lamps are compatible with Incure B/C-Series™ chambers?

Each chamber is matched to specific lamp models. The Incure B500 pairs with F100, F200, F100P, F200P, F400 and F500 UV arc flood lamps; the Incure B201 pairs with the F900P. The Incure C131D, Incure C131C, and Incure C141C are matched to the L11, L22, L33, and L44 UV LED flood lamps; the Incure C191C is matched to the L88, L1010, L1212, and L1414 series.

What safety features do Incure cure chambers include?

Incure B-Series chambers use an auto-shutter door interlock that closes automatically when the door opens, preventing accidental UV exposure. Incure C-Series chambers use a drawer-activated UV shut-off that cuts power to the lamp when the drawer is opened. All models have fully enclosed UV shielding and forced-air cooling.

Can Incure cure chambers integrate into production lines?

Yes. Incure B-Series chambers support dual D-sub control interfaces with PC, PLC, and foot-pedal inputs. Incure C-Series chambers accept foot-switch, PLC, and RS-232 signals. Both series can be integrated into semi-automated or fully automated production workflows.

What is the difference between the C131D and C131C?

The Incure C131D is a drawer-style design with a 3.1-inch internal height, optimised for flat substrates such as labels, films, and small panels. The Incure C131C is a compact cubic chamber (7.1 × 7.1 × 7.1 inches internal) suited for small components and R&D samples. Both are compatible with L11, L22, L33, and L44 UV LED flood lamps.

Which C-Series chamber works with L88 / L1010 / L1212 lamps?

The Incure C191C is the matched chamber for the L88, L1010, L1212, and L1414 UV LED flood lamp series. It provides a 19.7 × 19.7 × 13.8 inch internal working volume — the largest in the C-Series — with light-tight enclosed UV shielding and adjustable shelf for curing distance control.

What is the difference between B-Series and C-Series chambers?

Incure B-Series chambers are designed for UV arc flood lamps (mercury-arc technology) and use an auto-shutter door interlock. Incure C-Series chambers pair with UV LED flood lamps, use a drawer-activated UV shut-off, and are available in low-profile drawer format (Incure C131D) or enclosed chamber formats (Incure C131C, Incure C141C, Incure C191C) to suit a wider range of part sizes and production workflows.

UV Cure Chambers — Incure B/C-Series™

Fully enclosed curing enclosures matched to Incure UV flood lamps and UV LED flood irradiators — each with 360° UV shielding, door interlock safety, and automation-ready control interfaces for consistent, repeatable results.

Request a Quote View All Models

360° UV Shielding

Fully enclosed enclosure protects operators from high-intensity UV radiation during every cure cycle.

Door & Drawer UV Shut-Off

B-Series auto-shutter closes on door open; C-Series drawer-activated shut-off cuts lamp power — both eliminate accidental UV exposure.

D-sub, PLC, RS232 & Foot-Switch I/O

D-sub / RS232 / PLC / foot-switch signal inputs for seamless integration into production lines.

Specifications

Technical Specifications

Side-by-side specifications for Incure B/C-Series™ UV cure chamber models.

Specification	B-Series UV Arc Chambers		C-Series UV LED Drawers & Chambers
Specification	B500UV Arc Flood	B201UV Arc Flood	C131DUV LED Drawer	C131CUV LED Chamber	C141CUV LED Chamber	C191CUV LED Chamber
Image
Product Application	Compact UV arc curing for R&D and small-batch	Large-format UV arc curing for wider parts	Flat substrate curing / labels / films / panels	Small component curing / lab / R&D samples	General-purpose batch curing and assembly	Larger part curing and batch production
Lamp Type	UV Arc Flood	UV Arc Flood	UV LED Flood	UV LED Flood	UV LED Flood	UV LED Flood
Compatible Lamp Models	F100 / F200 / F100P / F200P / F400 / F500	F900P	L11 / L22 / L33 / L44	L11 / L22 / L33 / L44	L11 / L22 / L33 / L44	L88 / L1010 / L1212 / L1414
Internal Dimensions (L×W×H)	9″ × 9″ × 10.4″	12.5″ × 22.0″ × 16.4″	11.8″ × 11.8″ × 3.1″	7.1″ × 7.1″ × 7.1″	11.8″ × 11.8″ × 11.8″	19.7″ × 19.7″ × 13.8″
External Dimensions (L×W×H)	11.8″ × 11.6″ × 12.1″	14.1″ × 24.2″ × 19.5″	15.7″ × 15.7″ × 5.5″	9.1″ × 9.1″ × 9.1″	14.2″ × 14.2″ × 14.2″	22.4″ × 22.4″ × 15.7″
Tray / Shelf Positions	Adjustable shelf positions	Adjustable shelf positions	Drawer type / fixed height	Fixed chamber / no shelf	Adjustable shelf / curing distance	Adjustable shelf / curing distance
Door Interlock	Auto shutter	Auto shutter	Drawer-activated UV shut-off	Drawer-activated UV shut-off	Drawer-activated UV shut-off	Drawer-activated UV shut-off
Cooling System	Forced air, louvers	Forced air, louvers	Forced air, louvers	Forced air, louvers	Forced air, louvers	Forced air, louvers
Temperature Sensor	—	Integrated	—	—	—	—
Control Interface	Dual D-sub PC / PLC / Foot pedal	Dual D-sub PC / PLC / Foot pedal	Foot-switch / PLC / RS-232	Foot-switch / PLC / RS-232	Foot-switch / PLC / RS-232	Foot-switch / PLC / RS-232
Typical Applications	Adhesive curing / coating / bonding / potting trials	Large-area adhesive / coating / sealant curing	Flat substrate curing / labels / films / small panels	Small component curing / lab testing / R&D samples	General assembly curing / batch curing / component testing	Larger part curing / batch production / wide-area curing

— = data not published for this model. Contact support@uv-incure.com for full dimensional drawings.

Products

A Chamber for Every Lamp Configuration

Each chamber is engineered as a matched enclosure for a specific Incure UV or UV LED flood lamp.

Applications

Built for Safe, Repeatable UV Exposure

Incure B/C-Series™ cure chambers contain stray UV while delivering repeatable,
measured doses across industrial adhesive and coating applications.

Printed circuit board assembly for Incure B/C-Series™ UV cure chamber electronics batch processing

Electronics Assembly

PCB conformal coating cure, SMD component bonding, and underfill sealing — the enclosed chamber delivers controlled UV dose without exposing adjacent components.

Cleanroom assembly of catheters and sensors for Incure B/C-Series™ UV cure chamber medical device bonding

Medical Device Manufacturing

Catheter tip bonding, sensor encapsulation, and syringe barrel sealing — the enclosed design protects operators from UV exposure while delivering repeatable dose.

Optical Component Bonding

Lens bonding, prism assembly, and filter lamination — uniform flood exposure across the full chamber area ensures complete cure without optical scatter.

Industrial coating application process for Incure B/C-Series™ UV cure chamber adhesive and coating cure

Adhesive & Coating Cure

Batch curing of UV adhesive bonds, conformal coatings, and encapsulants — adjustable curing distance lets operators tune dose intensity to the application.

Industrial conveyor assembly line for Incure B/C-Series™ UV cure chamber automated PLC integration

Industrial Production Lines

PLC and RS232 integration triggers curing cycles from upstream equipment, enabling the B/C-Series™ chamber to run within automated production cells.

Research laboratory environment for Incure B/C-Series™ UV cure chamber R&D and process development

R&D & Process Development

Controlled, repeatable UV exposure for adhesive qualification, cure-schedule optimisation, and dose-response studies across formulations and substrate configurations.

FAQ

Frequently Asked Questions

Common questions about Incure B/C-Series™ UV cure chambers.

Each chamber is matched to specific lamp models. The Incure B500 pairs with F100, F200, F100P, F200P, F400, and F500 UV arc flood lamps; the Incure B201 pairs with the F900P. The Incure C131D, C131C, and C141C are matched to the L11, L22, L33, and L44 UV LED flood lamps; the Incure C191C is matched to the L88, L1010, L1212, and L1414 series.
Incure B-Series™ chambers use an auto-shutter door interlock — the shutter closes automatically when the door opens. Incure C-Series™ chambers use a drawer-activated UV shut-off that cuts power to the lamp when the drawer is opened. All models have fully enclosed UV shielding and forced-air cooling with louvers.
Yes. Incure B-Series™ chambers support dual D-sub control interfaces with PC, PLC, and foot-pedal inputs. Incure C-Series™ chambers accept foot-switch, PLC, and RS-232 signals. Both series can trigger curing cycles from upstream equipment for semi-automated or fully automated production integration.
The Incure C131D is a drawer-style design with a 3.1-inch internal height, optimised for flat substrates such as labels, films, and small panels. The Incure C131C is a compact cubic chamber (7.1 × 7.1 × 7.1 inches internal) suited for small components and R&D samples. Both are compatible with the L11, L22, L33, and L44 UV LED flood lamps.
The Incure C191C is the matched chamber for the L88, L1010, L1212, and L1414 UV LED flood lamp series. It provides a 19.7 × 19.7 × 13.8 inch internal working volume — the largest in the Incure C-Series™ — with light-tight enclosed UV shielding and an adjustable shelf for curing distance control.
Incure B-Series™ chambers are designed for UV arc flood lamps (mercury-arc technology) and use an auto-shutter door interlock. Incure C-Series™ chambers pair with UV LED flood lamps, use a drawer-activated UV shut-off, and are available in low-profile drawer format (Incure C131D) or enclosed chamber formats (Incure C131C, C141C, C191C) to suit a wider range of part sizes and production workflows.

UV Cure Chambers — Incure B/C-Series™

Technical Specifications

A Chamber for Every Lamp Configuration

Built for Safe, Repeatable UV Exposure

Frequently Asked Questions

Ready to Specify Incure B/C-Series™ UV Cure Chambers?